PRECISION PARTS / NEXT GENERATION WELDING
The future weldswith precision.
Laser welding consumables for U.S. workshops. Find protective lenses, focus optics, nozzles and wire tips around the machine you run.
Choose the exact brand, model and suffix.
Compare the head revision and original part.
Review the fitment notes, then add to cart.
01 / Machine intelligence
Your machine. Your match.
Choose your machine, shop its consumables and add parts directly to your cart. Check the installed head and original specification before ordering.
Everlast1300 WRedSabre 1300Part references identifiedFitment details +
The published collimator dimensions conflict. Do not order a collimator or full optics kit for a 1300 until its original diameter and part number are confirmed.
18 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- The current RedSabre 1300 listing specifies SUP33T. Confirm the installed gun label and revision.
- Protective lenses
- D18T2 protective windows: 18 mm diameter, 2 mm thickness. Everlast reference EV-D18T2-5 is a five-pack. Confirm the original holder and optical specification.
- Focus lenses
- The machine listing names D20 F150 focus and D20 F50 collimation. The SUP33T F50 kit instead lists a D16T5 F50 collimator. Ask Everlast to resolve the diameter for your serial number.
- Nozzles & tips
- Everlast lists single-wire guide tips for SUP21T, SUP23T and SUP33T guns. Match wire diameter. M16 nozzle selection also requires the original shape, height and feed setup.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Everlast1500 WRedSabre 1500Part references identifiedFitment details +
RedSabre machines have multiple head revisions. A part listed for SUP21T is not automatically interchangeable with SUP23T or SUP33T. Use the label on your installed gun.
34 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- The current listing describes SUP33T but names SUP21T in the included equipment. Confirm the actual head before choosing a cartridge or mirror.
- Protective lenses
- D18T2 protective windows: 18 mm diameter, 2 mm thickness. Everlast reference EV-D18T2-5 is a five-pack. Confirm the original holder and optical specification.
- Focus lenses
- D20T4.5 F150 welding and F800 cleaning optics are separate configurations. SUP21T and SUP23T cartridges differ; match the complete original assembly.
- Nozzles & tips
- Everlast lists single-wire guide tips for SUP21T, SUP23T and SUP33T guns. Match wire diameter. M16 nozzle selection also requires the original shape, height and feed setup.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Everlast1500 WRedSabre 1500XPart references identifiedFitment details +
RedSabre machines have multiple head revisions. A part listed for SUP21T is not automatically interchangeable with SUP23T or SUP33T. Use the label on your installed gun.
33 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- Refrigeration-cooled RedSabre 1500X. The reviewed machine listing does not establish one head revision; check the gun label.
- Protective lenses
- D18T2 protective windows: 18 mm diameter, 2 mm thickness. Everlast reference EV-D18T2-5 is a five-pack. Confirm the original holder and optical specification.
- Focus lenses
- D20T4.5 F150 welding and F800 cleaning optics are separate configurations. SUP21T and SUP23T cartridges differ; match the complete original assembly.
- Nozzles & tips
- Everlast lists single-wire guide tips for SUP21T, SUP23T and SUP33T guns. Match wire diameter. M16 nozzle selection also requires the original shape, height and feed setup.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Everlast2000 WRedSabre 2000Part references identifiedFitment details +
RedSabre machines have multiple head revisions. A part listed for SUP21T is not automatically interchangeable with SUP23T or SUP33T. Use the label on your installed gun.
34 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- The current listing specifies SUP33T. An older RedSabre 2000 manual documents SUP21T. Select parts by the installed head, not the model name alone.
- Protective lenses
- D18T2 protective windows: 18 mm diameter, 2 mm thickness. Everlast reference EV-D18T2-5 is a five-pack. Confirm the original holder and optical specification.
- Focus lenses
- D20T4.5 F150 welding and F800 cleaning optics are separate configurations. SUP21T and SUP23T cartridges differ; match the complete original assembly.
- Nozzles & tips
- Everlast lists single-wire guide tips for SUP21T, SUP23T and SUP33T guns. Match wire diameter. M16 nozzle selection also requires the original shape, height and feed setup.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Everlast2000 WRedSabre 2000XPart references identifiedFitment details +
RedSabre machines have multiple head revisions. A part listed for SUP21T is not automatically interchangeable with SUP23T or SUP33T. Use the label on your installed gun.
35 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- The current listing describes SUP33T but names SUP23T in the included equipment. Confirm the installed head and cooling configuration.
- Protective lenses
- D18T2 protective windows: 18 mm diameter, 2 mm thickness. Everlast reference EV-D18T2-5 is a five-pack. Confirm the original holder and optical specification.
- Focus lenses
- D20T4.5 F150 welding and F800 cleaning optics are separate configurations. SUP21T and SUP23T cartridges differ; match the complete original assembly.
- Nozzles & tips
- Everlast lists single-wire guide tips for SUP21T, SUP23T and SUP33T guns. Match wire diameter. M16 nozzle selection also requires the original shape, height and feed setup.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
IPG1000 WLightWELD 1000Part references identifiedFitment details +
OEM reference numbers do not verify a third-party replacement.
10 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- Match the LightWELD model, serial number, and installed handpiece.
- Protective lenses
- IPG lists protective-window pack CDSBOM00023703XU. Confirm its applicability to your handpiece with IPG.
- Focus lenses
- IPG lists replacement focus lens CDSBOM000234XXXU for all LightWELD models. This is an OEM reference, not an aftermarket equivalence.
- Nozzles & tips
- IPG lists 1-dot fusion nozzle CMUS0008398002XU for 1500 W or less. Confirm your process and handpiece.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
IPG1500 WLightWELD 1500 XRPart references identifiedFitment details +
OEM reference numbers do not verify a third-party replacement.
10 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- Match the LightWELD model, serial number, and installed handpiece.
- Protective lenses
- IPG lists protective-window pack CDSBOM00023703XU. Confirm its applicability to your handpiece with IPG.
- Focus lenses
- IPG lists replacement focus lens CDSBOM000234XXXU for all LightWELD models. This is an OEM reference, not an aftermarket equivalence.
- Nozzles & tips
- IPG lists 1-dot fusion nozzle CMUS0008398002XU for 1500 W or less. Confirm your process and handpiece.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
IPG2000 WLightWELD 2000 XRPart references identifiedFitment details +
OEM reference numbers do not verify a third-party replacement.
2 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- Match the LightWELD model, serial number, and installed handpiece.
- Protective lenses
- IPG lists protective-window pack CDSBOM00023703XU. Confirm its applicability to your handpiece with IPG.
- Focus lenses
- IPG lists replacement focus lens CDSBOM000234XXXU for all LightWELD models. This is an OEM reference, not an aftermarket equivalence.
- Nozzles & tips
- Confirm a 2000 W compatible nozzle with IPG. The 1-dot CMUS0008398002XU is listed for 1500 W or less.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Miller1000 WOptX 1kWPart references identifiedFitment details +
Use Miller's model and serial-number parts lookup. Similar-looking parts from another brand are not a confirmed match.
8 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- Use the OptX model and serial number to identify the installed handpiece and parts.
- Protective lenses
- Miller 301823: OptX protective windows, five-pack. Confirm the exact OEM reference against the serial-specific parts list.
- Focus lenses
- Miller 301802: OptX focus lens and housing assembly. Installation tool 301794 is specified separately.
- Nozzles & tips
- Welding nozzles: 301811 conical, 301812 one-point, 301813 two-point 6 mm, 301814 two-point 9 mm, 301815 wire feed. Contact tips: 301822, 1.2 mm, ten-pack.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Miller2000 WOptX 2kWPart references identifiedFitment details +
Use Miller's model and serial-number parts lookup. Similar-looking parts from another brand are not a confirmed match.
11 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- Use the OptX model and serial number to identify the installed handpiece and parts.
- Protective lenses
- Miller 301823: OptX protective windows, five-pack. Confirm the exact OEM reference against the serial-specific parts list.
- Focus lenses
- Miller 301802: OptX focus lens and housing assembly. Installation tool 301794 is specified separately.
- Nozzles & tips
- Welding nozzles: 301811 conical, 301812 one-point, 301813 two-point 6 mm, 301814 two-point 9 mm, 301815 wire feed. Contact tips: 301822, 1.2 mm, ten-pack. Cleaning references: 301819, 301820 and 301821.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
xTool800 WMetalFab 800WPart references identifiedFitment details +
Choose the correct connection version for your actual gun. These handheld parts are distinct from CNC cutting-head consumables.
3 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- MetalFab welding guns have push-to-connect and threaded structural versions. Power rating alone does not identify the connection.
- Protective lenses
- xTool P0102000105: ten protective lenses for the MetalFab welding gun. Confirm the original welding-gun part.
- Focus lenses
- A separately sold focus-lens or collimator replacement was not verified. Use xTool service to identify the original optic.
- Nozzles & tips
- P0102000104: push-to-connect nozzle set. P0102000321: threaded nozzle set. Each set contains wire and no-wire welding nozzles plus handheld cutting and cleaning tips.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
xTool1200 WMetalFab 1200WPart references identifiedFitment details +
Choose the correct connection version for your actual gun. These handheld parts are distinct from CNC cutting-head consumables.
3 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- MetalFab welding guns have push-to-connect and threaded structural versions. Power rating alone does not identify the connection.
- Protective lenses
- xTool P0102000105: ten protective lenses for the MetalFab welding gun. Confirm the original welding-gun part.
- Focus lenses
- A separately sold focus-lens or collimator replacement was not verified. Use xTool service to identify the original optic.
- Nozzles & tips
- P0102000104: push-to-connect nozzle set. P0102000321: threaded nozzle set. Each set contains wire and no-wire welding nozzles plus handheld cutting and cleaning tips.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Boss Laser1500–2000 WFC FusionFitment not yet verifiedFitment details +
Exact consumable part numbers and the installed head revision still need manufacturer confirmation. No replacement products have been assigned to this machine.
- Welding head
- Confirm the welding-head model and revision on the installed gun.
- Protective lenses
- Match the original part number, lens diameter and thickness, coating, and rated wavelength.
- Focus lenses
- Match the original assembly or part number, focal length, diameter, and holder. Welding and cleaning optics may differ.
- Nozzles & tips
- Match the gun interface, nozzle geometry, wire diameter, and welding process.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
SENFENGCheck configurationSF5SFitment not yet verifiedFitment details +
Exact consumable part numbers and the installed head revision still need manufacturer confirmation. No replacement products have been assigned to this machine.
- Welding head
- Portable air-cooled SF5S. Confirm the installed gun model and original consumable part number.
- Protective lenses
- Match the original part number, lens diameter and thickness, coating, and rated wavelength.
- Focus lenses
- Match the original assembly or part number, focal length, diameter, and holder. Welding and cleaning optics may differ.
- Nozzles & tips
- Match the gun interface, nozzle geometry, wire diameter, and welding process.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
SENFENG1500 W1500HWMFitment not yet verifiedFitment details +
Exact consumable part numbers and the installed head revision still need manufacturer confirmation. No replacement products have been assigned to this machine.
- Welding head
- Water-cooled HWM family. Confirm the specific 1500HWM gun model and revision.
- Protective lenses
- Match the original part number, lens diameter and thickness, coating, and rated wavelength.
- Focus lenses
- Match the original assembly or part number, focal length, diameter, and holder. Welding and cleaning optics may differ.
- Nozzles & tips
- Match the gun interface, nozzle geometry, wire diameter, and welding process.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Lasers Only1500 WCW 1500W 4-in-1Part references identifiedFitment details +
Aftermarket optics remain conditional aftermarket candidates; they are not an OEM-certified substitution.
9 consumable listings organized for this model. Open each part to check its required head and original specification.
View this machine’s consumables →- Welding head
- The reviewed CW 1500W 4-in-1 listing specifies a SUP23T head/controller. Confirm the label on the delivered machine.
- Protective lenses
- D18T2: ten protective windows, 18 mm diameter and 2 mm thickness, listed for SUP23T.
- Focus lenses
- SUP23T focus optics and cartridges are available in aftermarket configurations. Match the original lens dimensions, focal length, coating and complete cartridge before selecting an aftermarket part.
- Nozzles & tips
- Confirm the original SUP23T nozzle interface, geometry and wire-feed size. No generic nozzle is verified by the 1500 W rating alone.
The collection lists each part’s model and configuration requirements. Compare these with your original part before ordering.
Your machine isn’t listed yet.
Try a shorter model name or reset the brand filter. You can also send us your machine and head details.
Help identify my part ↗Selected manufacturer and U.S. seller listings, reviewed on the date shown. This directory is not a live stock feed or an exhaustive market list. Machine brands are used for identification; listings do not imply affiliation or verified aftermarket fit.
02 / The consumable system
Precision, in every layer.
Protective lenses ↗
The replaceable optical window. Start with the original specification.
02 /Focus lenses ↗
Match focal length, optical specification, and the complete assembly.
03 /Nozzles & tips ↗
Match your welding head, joint geometry, and wire setup.
04 /Collimating optics ↗
Identify the original assembly and check service requirements.
Illustrative category artwork. Check each product’s dimensions, head version and original part specifications.
03 / Know your machine
Confidence starts with compatibility.
A lens that looks right can still be the wrong part. Learn the few details that make the difference before you order.
Identify your machine ↗01Does matching the brand guarantee a fit?+
No. One brand can use multiple welding heads, power configurations, and hardware revisions. Start with the exact machine model and suffix, then check the label on the installed head and the original part number.
02Protective lens or focus lens?+
A protective window shields the optical path from contamination. A focus lens shapes the beam at the working distance. These serve different functions. Match the original specification, including dimensions, coating, wavelength rating, and focal length where applicable.
03Will a generic copper nozzle work?+
Appearance and material are not enough. The mounting interface, nozzle geometry, wire size, process, and power rating must match the documented head configuration. Welding, cutting, and cleaning accessories can have different requirements.
04What should I check before ordering?+
Record the machine model and serial number, welding-head model and revision, original part number, and the replacement specifications in the manufacturer’s manual. If these do not establish a match, request a fitment check before purchasing. Follow the manufacturer’s service procedures when replacing optics.
05Can I order laser welding parts in the United States?+
Laser Weld Depot accepts U.S. orders online. These catalog parts are special orders: availability and dispatch are confirmed after ordering. If a part cannot be supplied, the order will be refunded. Shipping charges and available services appear at checkout.
06What if I cannot identify my head or lens?+
Use the fitment request form with the machine model, serial or revision information, head label and original part markings. Avoid ordering on appearance alone. Follow the manufacturer’s service instructions for inspection or replacement.
Contact
Let’s find your exact fit.
Tell us the exact machine model, the welding-head model or revision, and any original part number. We’ll use those details to investigate compatibility before recommending a replacement.